USD
  • USD
  • CAD
0
USD$0.00 0 items

No products in the cart.

USD
  • USD
  • CAD
0
USD$0.00 0 items

No products in the cart.

Rebuilding a hydraulic final drive motor can be a cost-effective alternative to purchasing a brand new motor, but it's important to carefully consider the potential drawbacks before deciding to go down this route. Here are a few potential negatives to rebuilding a hydraulic final drive motor:

  1. It can be time-consuming. Rebuilding a motor requires disassembling the motor, cleaning and inspecting each component, and then reassembling the motor with any necessary repairs or replacements. This process can take a significant amount of time, especially if the motor is in particularly poor condition.
  2. It can be expensive. While rebuilding a motor can be less expensive than buying a new one, the costs can still add up, especially if multiple components need to be replaced. In some cases, it may be more cost-effective to simply purchase a new motor.
  3. There is a risk of further damage. If the motor is not properly disassembled, cleaned, and reassembled, it is possible to cause further damage during the rebuilding process. This can lead to even more costly repairs down the line.
  4. It may not be as reliable as a new motor. Even with a thorough rebuilding, there is always a risk that the motor may not perform as well as a brand new motor. This can be especially concerning in critical applications where reliability is a top priority.
  5. It may not be as efficient as a new motor. Depending on the age and condition of the motor, rebuilding it may not result in the same level of energy efficiency as a brand new motor. This can be a concern in applications where energy efficiency is a key factor.

Overall, while rebuilding a hydraulic final drive motor can be a cost-effective option in some cases, it's important to carefully weigh the potential negatives before making a decision. In some cases, it may be more practical and cost-effective to simply purchase a new motor.

ABOUT

Hydraulic America is a representative branch of South Korean hydraulic component manufacture. Our parent company has been supplying hydraulic parts for over four decade to construction machinery brands such as Hyundai, Doosan and Volvo in domestic market as well as other international brands all around the globe. We are proud to offer our decades old experience and high quality products to our North American clients.
72 Benbro Dr, Cheektowaga, NY 14225
55 Oakdale Ave St. Catharines, ON L2P 2L3
shophydraulicamerica.com
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram